Beams, Channels & Angles
Hot rolled sections are the skeleton of steel buildings, industrial sheds, bridges and plant structures. We supply European, British, American and Indian profiles — beams, columns, channels, angles and flat bars — from established mills in China and India.
Supply range
Specification
Typical supply window. Final dimensions and tolerances are confirmed per order against mill capability and the ordered standard.
- I-beams
- IPE 80 – 600 · UB · W-shapes · ISMB
- H-beams / columns
- HEA · HEB · HEM 100 – 1000 · UC · ISHB
- Channels
- UPN · UPE · PFC · ISMC 50 – 400 mm
- Angles
- Equal & unequal, up to 250 × 250 mm
- Flat bars
- 20 – 300 mm wide · 3 – 50 mm thick
- Length
- 6 m · 12 m · 5.8 / 11.8 m for containers
- Finish
- Black · shot-blasted & primed · hot-dip galvanized
Grade cross-reference
Order in your standard.
Approximate equivalents across the standards our buyers specify most. Always confirm chemical and mechanical requirements before ordering.
| Use | JIS (Japan) | EN (Europe) | ASTM (USA) | China | BIS (India) |
|---|---|---|---|---|---|
| General structural | SS400 | S235JR · S275JR | A36 | Q235B | IS 2062 E250 |
| High strength | SM490 | S355JR · S355J2 | A572 Gr.50 · A992 | Q355B | IS 2062 E350 |
| Profile standard | JIS G3192 | EN 10365 · EN 10056 | ASTM A6 | GB/T 706 · GB/T 11263 | IS 808 |
Applications
Where it goes.
- Steel-framed buildings & warehouses
- Pre-engineered buildings (PEB)
- Industrial plants, pipe racks & mezzanines
- Bridges & infrastructure
- Towers, masts & solar structures
- Trailers, cranes & heavy fabrication
Packing & documents
Seaworthy, every time.
Bundled by size with steel straps and tagged with heat number, grade and size. 5.8 m and 11.8 m lengths are loaded in containers; 6 m and 12 m lengths ship break-bulk or in open-top / flat-rack containers.
- Mill test certificate (EN 10204 3.1) with heat numbers
- Commercial invoice, packing list & bill of lading
- Certificate of origin
- Third-party inspection report on request
FAQ
Common questions.
Can you supply European, British and American profiles?
Yes — IPE, HEA, HEB and UPN (EN), UB, UC and PFC (BS), W-shapes (ASTM) and ISMB / ISMC (IS) are available, depending on mill rolling schedules. Share your section list and we will match it.
Do you supply primed or galvanized sections?
Sections can be supplied black, shot-blasted and primed, or hot-dip galvanized, arranged through the mill or a processing partner.
Can I order a mixed list of sizes?
Yes. Mixed sizes can be combined in one container load. Direct mill rolling orders usually carry a minimum per size, which we confirm with the offer.
Need structural steel this quarter?
Send grade, size, quantity and destination port — we'll return a firm offer.
Request a quote