Cold Rolled Coils & Sheets
Cold rolled steel is reduced at room temperature after pickling, giving tighter thickness tolerances, better flatness and a clean, bright surface — ideal for appliances, furniture, automotive parts and as substrate for galvanizing and colour coating.
Supply range
Specification
Typical supply window. Final dimensions and tolerances are confirmed per order against mill capability and the ordered standard.
- Thickness
- 0.15 – 3.0 mm
- Width
- 600 – 1550 mm
- Coil ID
- 508 / 610 mm
- Coil weight
- 3 – 20 MT
- Temper
- Full hard · annealed · skin-passed
- Surface
- Bright · matt
- Treatment
- Oiled · dry
Grade cross-reference
Order in your standard.
Approximate equivalents across the standards our buyers specify most. Always confirm chemical and mechanical requirements before ordering.
| Use | JIS (Japan) | EN (Europe) | ASTM (USA) | China | BIS (India) |
|---|---|---|---|---|---|
| Commercial quality | SPCC | DC01 | A1008 CS | SPCC / ST12 | IS 513 CR1 |
| Drawing quality | SPCD | DC03 | A1008 DS | ST13 | IS 513 CR2 |
| Deep drawing | SPCE | DC04 | A1008 DDS | ST14 | IS 513 CR3 |
| Extra deep drawing | SPCF | DC05 · DC06 | A1008 EDDS | — | IS 513 CR4 |
Applications
Where it goes.
- Home appliances & white goods
- Steel furniture, shelving & lockers
- Automotive components
- Drums, barrels & containers
- Electrical panels & enclosures
- Substrate for GI / PPGI lines
Packing & documents
Seaworthy, every time.
Fully wrapped in VCI paper and plastic film, inner and outer steel rings, edge protectors and steel bands; sheets packed in sealed bundles on wooden skids.
- Mill test certificate (EN 10204 3.1) with heat numbers
- Commercial invoice, packing list & bill of lading
- Certificate of origin
- Third-party inspection report on request
FAQ
Common questions.
Full hard or annealed — which do I need?
Full hard (unannealed) is strong but has little ductility — usually for further processing such as galvanizing. Annealed CR is soft and formable for pressing, bending and drawing.
Can CR be slit or cut to length?
Yes. Slit coils and cut-to-length sheets can be arranged at the mill or a service centre to your dimensions.
What tolerances apply?
Tolerances follow the ordered standard (e.g. JIS G3141, EN 10131). Tighter tolerances can be agreed with the mill at order stage.
Need CR this quarter?
Send grade, size, quantity and destination port — we'll return a firm offer.
Request a quote