Rebar & Wire Rod
High-strength deformed bars reinforce every concrete structure, from villas to towers and infrastructure. We supply rebar (TMT bars) in straight lengths and coils, plus low-carbon wire rod, to the standard your project specifies.
Supply range
Specification
Typical supply window. Final dimensions and tolerances are confirmed per order against mill capability and the ordered standard.
- Bar diameter
- 8 – 40 mm
- Length
- 12 m standard · 6 – 18 m on request
- Rebar in coil
- 8 – 16 mm
- Wire rod
- 5.5 – 16 mm
- Bundle weight
- 2 – 3 MT
- Testing
- Tensile, bend / rebend and chemical — per heat
- Surface
- Ribbed (deformed) · plain on request
Grade cross-reference
Order in your standard.
Approximate equivalents across the standards our buyers specify most. Always confirm chemical and mechanical requirements before ordering.
| Use | JIS (Japan) | EN (Europe) | ASTM (USA) | China | BIS (India) |
|---|---|---|---|---|---|
| Yield ≈ 400 – 420 MPa | SD390 | — | A615 Gr.60 | HRB400 · HRB400E | IS 1786 Fe415 |
| Yield ≈ 500 MPa | SD490 | B500B · B500C (BS 4449) | A615 Gr.75 | HRB500 · HRB500E | IS 1786 Fe500 · Fe500D |
| Wire rod | SWRM 6 – 10 | C4D – C9D (EN ISO 16120) | SAE 1006 · 1008 | Q195 · SAE 1008 | IS 7887 |
Applications
Where it goes.
- Residential & commercial buildings
- High-rise towers
- Bridges, roads & tunnels
- Precast concrete & mesh
- Industrial foundations
- Wire drawing, nails & mesh (wire rod)
Packing & documents
Seaworthy, every time.
Straight bars in bundles of 2 – 3 MT tied at regular intervals, each tagged with heat number, grade and size; coils compact-strapped. Shipped break-bulk or in containers at 11.8 m lengths.
- Mill test certificate (EN 10204 3.1) with heat numbers
- Commercial invoice, packing list & bill of lading
- Certificate of origin
- Third-party inspection report on request
FAQ
Common questions.
Which rebar standard is used in the GCC?
ASTM A615 Gr.60 and BS 4449 B500B are the most common. Some markets, such as Saudi Arabia, require product certification for rebar — we confirm the requirements before offering.
Is TMT the same as rebar?
TMT (thermo-mechanically treated) describes the process most modern mills use to make high-strength, weldable rebar. In India the two terms are used interchangeably.
Can you supply cut-and-bent rebar?
For larger project orders, cut-and-bend to your bar-bending schedule can be discussed with processing partners. Send us your schedule.
Need rebar this quarter?
Send grade, size, quantity and destination port — we'll return a firm offer.
Request a quote